product details
Floor spring, floor spring manufacturer, floor spring brand, floor spring price, door control hardware
How to remove the floor spring glass door?
Step 1: Disassemble the spring glass door: Use a cross screwdriver to remove the small stainless steel clip on the top corner of the door. Place a soft carpet under the door and use a 5mm Hex key to remove the two small screws that fix the small silver iron fittings in the clip and hold the door in place. Put something under the door to lift the spring shaft out of the door. Lift the door out and place it properly.
Step 2: Remove the stainless steel cover of the upper and lower glass clips on the door. Open the door to a 90 degree positioning view point, and use something to support the lower corner of the handle opening end. One person should support the door, and the other person should use a 6-angle spoon to unscrew the screws fixing the shaft sleeves on the upper and lower door clips of the door. Remove the shaft sleeves to remove the door. If you only remove the door clamp shaft sleeve and tilt the door slightly, even if it is in a sufficient position, you can lift the door a little higher and remove it, so you don't need to remove the lower door clamp shaft sleeve.
